Embeded Fixed Magnets - NdFeB Magnetic Assembly 20181123

Embedded fixed magnets, also known as fixed sleeve magnetic blocks, pre-buried pipe magnets, and concrete reserved hole magnets. This is a new NdFeB magnetic assembly in precast industry. This is the best tool to left holes to link the pipe on the concrete modules.

Type No.	Thread OD mm	D1 mm	D2mm	Height mm
CREPM12	12	49.5	46	10
CREPM14	14	54.5	51	10
CREPM16	16	58.2	55	10
CREPM18	18	61.5	58	10
CREPM20	20	72.5	69	10
CREPM24	24	77.2	73	12
CREPM30	30	93.2	89	12
CREPM36	36	104.2	100	12
CREPM42	42	114.3	109	15
CREPM52	52	134.3	129	15

To use the embedded fixed magnets, firstly, it should be put on the iron plate of concrete modules. Then, insert a piece of PVC or PE pipe onto the embedded fixed magnet. After that, concrete can be put into the concrete module. If you want to remove the embedded fixed magnet, we need a hexagonal metal tool that matches the size of the screw hole. The embedded fixed magnet is composed of two parts: a magnet base with a screw hole and a threaded rod with a hexagonal hole.

In order to ensure the product has enough suction, the product is made by the NdFeB magnets that has the strongest suction. The coating of the magnet is NiCuNi. To prevent rusting, Zn or other material will be plated on the metal base. The surface of the magnet should be flat and clean, or it will decrease concrete reserved hole magnet’s actual suction. The maximum operating temperature of concrete reserved hole magnet is 80℃，please do not heat the magnet directly and keep it away from fire. If you want a higher operating temperature, you should use the higher grade magnets.

The assembly’ magnet suction and sizes will be adapted to customers’ actual requirements.

Tags: embeded fixed magnets, ndfeb magnets, magnetic assembly